Types and usage of swimming pool disinfecting tablets

2022-08-08


  Chlorine tablets used in swimming pools are a long-lasting, low-toxicity, and fast-acting bactericidal disinfectant that can kill various pathogenic microorganisms such as bacterial spores, bacterial vegetative cells, and fungi. They are effective against hepatitis viruses and other epidemic viruses, and can quickly kill and strongly inhibit algae such as blue-green algae, red algae, and seaweed.

  Its chlorine content is ≥50%, and it is a fast-dissolving tablet, meaning it dissolves completely in about 10 minutes after being added to the swimming pool. To ensure the residual chlorine in the pool meets standards and more effectively maintain good water quality, 2-4 grams of disinfectant tablets should be added per cubic meter of water (2-4 kg/1000 cubic meters). After adding the disinfectant tablets to the swimming pool, the residual chlorine calculation formula is: (For example, using 2 grams - 1 tablet of disinfectant per cubic meter) 2g × 50% × 1000 = 1000mg (the effective chlorine contained in 2 grams of disinfectant tablets, unit: milligrams) 1000mg ÷ 1000L (1 cubic meter) = 1mg/L (also known as 1ppm). This means that if 1 tablet of disinfectant is added to 1 cubic meter of water, and if there is no consumption, the theoretical concentration is 1mg/L.

  Generally speaking, after adding the disinfectant, the disinfectant will definitely react with bacteria and algae in the water (a portion will also be consumed by organic matter in the water). Because the water quality conditions vary among different swimming pools, the measurable residual chlorine concentration after adding the same amount of disinfectant tablets will also vary. Pools with better water quality will have higher residual chlorine, while those with poor water quality will have lower residual chlorine.

  Therefore, it is recommended that when adding the disinfectant at night, use a smaller amount, at 2 kg/1000 cubic meters; if the water has turned green or whitish, increase the amount.

  Add disinfectant tablets to the swimming pool 0.5-1 hour before opening. Before adding, test the residual chlorine, and then calculate the amount to be added based on the ratio that adding 2 kg of disinfectant tablets per 1000 cubic meters increases the concentration by 1mg/L. For example: A 500 cubic meter swimming pool needs to increase the concentration by 0.5mg/L, so 0.5 kg of disinfectant tablets should be added.